CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 08-02-2025, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non

07-28-2025, (Subject: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non )

Post: #7

3406E

Offline

Established (18 Likes)

Posts: 161
Joined: Jan 2024

Thanks: 88
Given 18 thank(s) in 14 post(s)

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non

(07-25-2025 )Redland1 Wrote: Hello all. Hope the trucking world is treating y’all well. I have an 04’ CM 870 that has the soot marks on the outside of the seals and I’m going to replace the seals and bolts but while I’m at it I want to replace the EGR end with a non EGR end. Would it be possible to even remove that end on a manifold that has 7-800k miles on it ?
Reason for wanting to replace it is due to the blocker plate leaking no matter how many times I replace the gasket or clamp. The other route I might take is having a steel plate welded on there while it’s out.
Also is the part number 3683870 for the manifold end without EGR ?

Just for reference mine was leaking too. First two from front of Engine. Replaced it with multilayer steel gaskets all studs and sleeve. Single piece Part number you are looking for without egr is 3682491.

Attached File(s)Thumbnail(s)

Return to Top | find

Thanks given by:

« Next Oldest | Next Newest »

Messages In This Thread

CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Redland1 - 07-25-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Pigpen 2869 - 07-25-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Rawze - 07-25-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Redland1 - 07-27-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - marek4792 - 07-25-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - marek4792 - 07-27-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - 3406E - 07-28-2025

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - 3406E - 07-28-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Redland1 - 07-29-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - 3406E - 07-29-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Rawze - 07-29-2025,

Want to replace the EGR section with non - mikkhh - 07-29-2025,

RE: CM 870 exhaust manifold is leaking at seals. Want to replace the EGR section with non - Rawze - 07-29-2025,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2025 MyBB Group | Theme by Laughing Inc - Web Design