Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / CM2250 shutting of while trying to take off

new reply
CM2250 shutting of while trying to take off
Yesterday, (Subject: CM2250 shutting of while trying to take off ) 
Post: #10
ricoriverausmc Offline
Established  (0 Likes)  **

 		Posts: 10
Joined: Oct 2022
Thanks: 1
Given 0 thank(s) in 0 post(s)
RE: CM2250 shutting of while trying to take off
(09-23-2025 )Rawze Wrote:  
(09-23-2025 )tree98 Wrote:  Will it pass a leakdown test?.......

https://odysee.com/@rawze:d/isx-injector...e-cm2250:e

yes ... if it will not pass a leak-down test then that is the first place to start with it.

next is the de-mandate programming to ensue it is not killing the engine internally and now something has caught up with this fact. More then 90% of all de-mandate programming is harmful to the engine over time... some far worse than others.

Just did the test as advices and it passed twice. Only dropped about 400 psi in one minute
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: CM2250 shutting of while trying to take off - ricoriverausmc - Yesterday



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication