ISX and Bypass Oil Filter Systems
03-06-2026, (Subject: ISX and Bypass Oil Filter Systems ) 
Post: #131
RE: ISX and Bypass Oil Filter Systems
(03-05-2026 )ne14jpn Wrote:  ...
I ended up using Port #3 with a straight fitting and planning to use a 90* end on the hose to get it away from the turbo heat. @Rawze - when you had issues with heat was the fitting a straight? I could see how that would be very close to the housing.

It was a straight fitting. I did solve some of the heat issue by putting on a double layer of exhaust heat protection wrap around the hoses where it ran nearest to the turbo.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: ne14jpn


Messages In This Thread
RE: ISX and Bypass Oil Filter Systems - Rawze - 03-06-2026



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.