ISX15 to x15 2012 Pete

[Rawze]

(08-05-2026 )DirtyKarl95 Wrote:  Well I did go against advice and did what customer wanted. X15 is in and I am now having issues with abnormal update rates. Specifically the accelerator pedal. I’ve changed it from a dual analog to a pulse width that corrected the voltage codes I was previously having.i also enabled multiplexing for accelerator pedal. Is there a way to turn the ecms Can communication down to 250 to match the rest of the truck as it is currently at 500 baud .? This is a cm2450A ecm

use the old ecu and wiring harness, etc. as mentioned above .. otherwise you have opened a huge can of worms!!!.