| X15 constant regeneration |
| Yesterday, (Subject: X15 constant regeneration ) Post: #3 | |||
| |||
RE: X15 constant regeneration (08-10-2026 )Therealarw Wrote: ...Only things I haven’t done on it are an ECM calibration, or ran the rack on it or checked the injectors. ... First of all,.. take the cans to an OEM stealers$it and have them baked, de-ashed, and flow tested. - the truck engine regen process is incapable of cleaning the DPF fully, and only converts soot into ash that it cannot get rid of. Make sure any cleaning process while they arer removed does NOT use any liquids, as they will wash out the precious metals, and make DPF half as effective... leading to nox, regen, and other issues. Also, Re-flashing the ecu software, even if it is the same version, will force-reset all the data in the ecm and make it establish a new base-line. This is far more effective than simply doing maintenance resets... especially if you replaced the cans with new ones. and yeah... the issues are at the engine not the cans under the truck.. fix the engine .. a full egr tune-up/cleaning, injector tests/replacements, overhead valves, etc.etc. - like was mentioned in the post above. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
X15 constant regeneration - Therealarw - 08-10-2026, RE: X15 constant regeneration - marek4792 - 08-10-2026, RE: X15 constant regeneration - Rawze - Yesterday |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.