N14 Injector Solenoid Failure
Today, (Subject: N14 Injector Solenoid Failure ) 
Post: #1
N14 Injector Solenoid Failure
Has anyone else come across this issue on a N14 Celect Plus? What's happening is that it keeps breaking the internal plunger on the solenoids and will cause an over fueling condition. It is always #4 injector. I've attached some pictures so you guys can see what I'm talking about.


   
   

I've checked cam, cam followers, push tubes, rocker arms and shaft, ohmed out harness and load tested it, pass-through as well, and ecm. Any suggestions guys?
replyreply


Messages In This Thread
N14 Injector Solenoid Failure - mechanixrds - Today



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.