Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / Low oil pressure on gauge?

new reply
Low oil pressure on gauge?
10-26-2016, (Subject: Low oil pressure on gauge? ) 
Post: #11
Hammerhead Offline
Kookoo for Cocoa Puffs  (1918 Likes)  *****

 		Posts: 1,400
Joined: May 2016
Thanks: 1014
Given 1918 thank(s) in 738 post(s)
RE: Low oil pressure on gauge?
(10-26-2016 )Jarhead79 Wrote:  Pump seems to be original old looking. Where is the oil sensor?

What do you mean by the "Pump seems to be original old looking."? The oil pump is located inside the oil pan, front bottom of the block/front gear case as it is driven by the front gear Assy. Did you remove the pan to look at it?

As stated, sensor is drivers side of block, approx where #5 cyl is, and approx 8" above the top of the frame.
This is an oil pressure sensor.
./uploads/201610/post_2077_1477511184_df1d40e255a3a396d4a6157abfde4514.jpeg
Part number 4921517. I recommend everyone carry a spare. Having your truck shut down when you have a faulty sensor is not convenient.

If your jakes are strong, you have oil pressure. Jakes are driven by pressurized oil.

User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Low oil pressure on gauge? - Hammerhead - 10-26-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication