cm 870 six Delta p sensor

[marek4792]

(03-07-2016 )Unilevers Wrote:  

(03-07-2016 )marek4792 Wrote:  I have the same code as you pid411 "value too high" and/or "electrical" and I was wondering if it is also effecting boost even if the mandate blocked off?

if the mandate is properly removed, then no - that code will disappear and not effect anything.

I only did the mechanical part of the "mandate" and nothing to the ecm except had the latest calibration installed cpl 8287 500hp 1600ftlbs, sorry for not giving you enough info.