2250 low rail pressure code

[simon999]

(08-11-2017 )loghauler Wrote:  I got me a gasket rawze. What's the process of removing the head from the pump? The 4 Allen bolts?

No you dont need to touch allen bolts. There are 4 12mm bolts. You need to follow manual from quickserve.

  pump head2250.pdf (Size: 2.74 MB / Downloads: 993)
Also there are good videos from cummins how to inspect head and install plungers
Head inspection:
https://www.dropbox.com/s/r64xtf1je9hta3...n.mp4?dl=0
How to install plungers:
https://www.dropbox.com/s/n9dqxkb70laxc4...l.mp4?dl=0
When you put back tappets to the pump make sure you put in same orientation. Each tappet has grove, it has to go to the guide pin in the pump body. The guide pins can be easy turned with finger and have to be in vertical position. Otherwise you can damage the pump.
   
   
Barrel and plunger repair kit part numbers