2250 low rail pressure code

[loghauler]

(08-11-2017 )simon999 Wrote:  

(08-11-2017 )loghauler Wrote:  I got me a gasket rawze. What's the process of removing the head from the pump? The 4 Allen bolts?

No you dont need to touch allen bolts. There are 4 12mm bolts. You need to follow manual from quickserve.

Also there are good videos from cummins how to inspect head and install plungers
Head inspection:
https://www.dropbox.com/s/r64xtf1je9hta3...n.mp4?dl=0
How to install plungers:
https://www.dropbox.com/s/n9dqxkb70laxc4...l.mp4?dl=0
When you put back tappets to the pump make sure you put in same orientation. Each tappet has grove, it has to go to the guide pin in the pump body. The guide pins can be easy turned with finger and have to be in vertical position. Otherwise you can damage the pump.


Barrel and plunger repair kit part numbers

Thank you sir! I received the gasket today, are all of them the same? Just making sure this is the right gasket