Cm2250 tune |
06-21-2018, (Subject: Cm2250 tune ) Post: #1 | |||
| |||
Cm2250 tune I got a remote mandate by a guy in Oregon, was wondering if someone could check the tune and make sure its correct, I don't want to fall victim to a blown motor. Manifold pressure is at 35 psi Motor runs smoothly, and Jake's work good. Just want to make sure every parameter has been changed to correct number or code | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Cm2250 tune - cyclegear99 - 06-21-2018 RE: Cm2250 tune - Nilao - 06-21-2018, RE: Cm2250 tune - cyclegear99 - 06-21-2018, RE: Cm2250 tune - cyclegear99 - 06-21-2018, RE: Cm2250 tune - hhow55 - 06-22-2018, RE: Cm2250 tune - Rawze - 06-22-2018, RE: Cm2250 tune - cyclegear99 - 06-22-2018, RE: Cm2250 tune - Unilevers - 06-22-2018, RE: Cm2250 tune - Nilao - 06-22-2018, RE: Cm2250 tune - cyclegear99 - 06-22-2018, RE: Cm2250 tune - smorgan87 - 06-23-2018, RE: Cm2250 tune - cyclegear99 - 06-23-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.