Torque specs
10-10-2018, (Subject: Torque specs ) 
Post: #11
RE: Torque specs
Where are you located in the world? That will help narrow down the list of good places to buy parts and tools that are local to you. Also Ebay, Amazon, Google searching, all kinds of place on the World Wide Web. You never have to be stuck going to a shop for anything these days.

I use and carry in the truck a 10 ton hydraulic hand pump bottle jack that I picked up at the local Harbor Freight store. At home I have 2 air over hydraulic bottle jacks bought from the same store. There's not a whole lot I can't pick up with them. Including when the trailer is loaded. I will also strongly recommend you buy good quality jackstands. I use 6 ton rated minimum. Use them and use them properly. The weights your dealing with will kill you or cut off what ever it pinches. As it was once said to me "the truck won't feel bad and get off you just cause your crying and dieing" Safety 1st always.
replyreply
 Thanks given by: Doublecoin


Messages In This Thread
Torque specs - lonestar16 - 10-04-2018,
RE: Torque specs - Rounded_nut - 10-04-2018,
RE: Torque specs - lonestar16 - 10-04-2018,
RE: Torque specs - Rawze - 10-04-2018,
RE: Torque specs - lonestar16 - 10-04-2018,
RE: Torque specs - lonestar16 - 10-05-2018,
RE: Torque specs - Hammerhead - 10-06-2018,
RE: Torque specs - lonestar16 - 10-10-2018,
RE: Torque specs - Chamberpains - 10-10-2018
RE: Torque specs - Waterloo - 10-10-2018,
RE: Torque specs - Rawze - 10-10-2018,
RE: Torque specs - Hammerhead - 10-10-2018,
RE: Torque specs - lonestar16 - 10-10-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.