Pulling injectors
04-27-2016, (Subject: Pulling injectors ) 
Post: #1
Pulling injectors
Hey guys, thought I would share.
This is the tool I use for pulling injectors.
I like it because it's adjustable pivot end
.I bought it at Napa in a 3 piece set but can't remember the cost. Napa will break it down if you just need the one but it wasn't that expensive for all 3 so that's how I bought them.
Part number is PBF 10.


Attached File(s)Image(s)
./uploads/201604/post_132_1461793909_a80a61ed8cbb8c94cc39280729ac6bad.jpg./uploads/201604/post_132_1461793876_3cf468f6744e2a1834068413aa28b783.jpg
replyreply


Messages In This Thread
Pulling injectors - dbl overdrive - 04-27-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.