ISX-15 pushing coolant from pressure cap on reservoir tank
01-18-2019, (Subject: ISX-15 pushing coolant from pressure cap on reservoir tank ) 
Post: #13
RE: ISX-15 pushing coolant from pressure cap on reservoir tank
These engines have some definite issues with shims and counter bore. I can’t believe what little material in the block holds this thing together. Just the shims themselves are not wide enough in my opinion. If there not perfectly centered, the liner is just barely even hanging on the ledge.
replyreply
 Thanks given by: Waterloo


Messages In This Thread
RE: ISX-15 pushing coolant from pressure cap on reservoir tank - Magard - 01-18-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.