Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / CM 870 ISX

new reply
CM 870 ISX
03-17-2019, (Subject: CM 870 ISX ) 
Post: #10
Contributing V.I.P.Chamberpains Offline
Contributing V.I.P.  (2773 Likes)  ****

 		Posts: 2,312
Joined: Jan 2018
Thanks: 1172
Given 2773 thank(s) in 1446 post(s)
RE: CM 870 ISX
What are you using to get your exhaust temps? In tube or on tube? Factory dash gauge or aftermarket? Has it been verified to be accurate?

How are you getting your boost readings? Factory dash gauge, after market setup or or reading it from scanner or Insite?

If after market or factory dash gauges, have they been verified accurate? Insite only see's what the intake pressure sensor sends to the ECM.
Return to Top | find
replyreply
new reply


Messages In This Thread
CM 870 ISX - Kevroo - 03-14-2019,
RE: CM 870 ISX - Rawze - 03-15-2019,
RE: CM 870 ISX - Chamberpains - 03-15-2019,
RE: CM 870 ISX - Kevroo - 03-15-2019,
RE: CM 870 ISX - Kevroo - 03-15-2019,
RE: CM 870 ISX - RyanC - 03-15-2019,
RE: CM 870 ISX - Rawze - 03-15-2019,
RE: CM 870 ISX - Chamberpains - 03-15-2019,
RE: CM 870 ISX - Kevroo - 03-16-2019,
RE: CM 870 ISX - Chamberpains - 03-17-2019
RE: CM 870 ISX - Kevroo - 03-17-2019,
RE: CM 870 ISX - Rawze - 03-17-2019,
RE: CM 870 ISX - Chamberpains - 03-17-2019,
RE: CM 870 ISX - Kevroo - 03-17-2019,
RE: CM 870 ISX - Rawze - 03-17-2019,
RE: CM 870 ISX - Chamberpains - 03-17-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication