Cm2350 down 559 issues
05-26-2019, (Subject: Cm2350 down 559 issues ) 
Post: #19
RE: Cm2350 down 559 issues
You probably gonna need new gaskets and seals for that head but if that will get you rolling idk.Those 4 10mm head bolts has a torque spec of 50 foot pounds, then moved again 60 degrees. Idk if you could get by without a torque wrench but maybe some compressed air in the side of the pump can free it up the pin not going back??
I'll send u pm with a link of what mine was like.


User's Signature: Also known as Shotgun
replyreply
 Thanks given by: Ironsled


Messages In This Thread
RE: Cm2350 down 559 issues - flatbed94kid - 05-26-2019



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.