Parts pricing mayhem.

[Chamberpains]

(07-19-2019 )Nilao Wrote:  Not the hub the fan mounts to, the hub the clut6ch assembly mounts to that has the pulley. It is only 2 bearing held in with clips. The are pressed in with an arbor press.

Ya, sorry. I guess I over looked the just replacing the bearings. I thought you were rebuilding the hub itself.

Ya just 2 bearings held in by a snap ring. I couldn't find the original part number bearings for mine. I just took the old ones to a bearing store/shop and they found me same bearings from a different manufacturer for something like $40.

Whatever you do don't hit the pulley with anything. It is hard but brittle. I chipped mine pretty easily. Press the hub off if possible. Then I used a punch and socket to get the actual bearings out.