Cut an access panel in the floor or find another way?

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 05-05-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Cut an access panel in the floor or find another way?

07-12-2020, (Subject: Cut an access panel in the floor or find another way? )

Post: #1

Meanwhile Offline

Offline

Established (27 Likes)

Posts: 78
Joined: May 2020

Thanks: 37
Given 27 thank(s) in 18 post(s)

Cut an access panel in the floor or find another way?

I watched a few videos on how people have changed sensors on the tops of the automated transmissions by going through the hole where the normal gear shift would be. Mine does not have a cover in this spot to get to the top of the transmission. Is it a bad idea to neatly put one in and make a bolt down cover?

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

Cut an access panel in the floor or find another way? - Meanwhile - 07-12-2020

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Meanwhile - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - JimT - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Meanwhile - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Nostalgic - 07-19-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Meanwhile - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Lonestar10 - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-12-2020,

RE: Cut an access panel in the floor or find another way? - Meanwhile - 07-13-2020,

RE: Cut an access panel in the floor or find another way? - JimT - 07-13-2020,

RE: Cut an access panel in the floor or find another way? - Chamberpains - 07-13-2020,

RE: Cut an access panel in the floor or find another way? - StillTrucking - 07-19-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-19-2020,

RE: Cut an access panel in the floor or find another way? - Waterloo - 07-19-2020,

RE: Cut an access panel in the floor or find another way? - barf - 07-19-2020,

RE: Cut an access panel in the floor or find another way? - Meanwhile - 07-19-2020,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design