| Drive shaft alignment |
| 08-06-2021, (Subject: Drive shaft alignment ) Post: #1 | |||
| |||
Drive shaft alignment  I put a string from the transmission yoke to the rear differential input yoke. It shows the carrier bearing is a little bit to one side. I would think it should line up with the other two. I would have to drill the bracket to accomplish that. Is that necessary or is this somewhat normal? I don’t necessarily feel any vibration to speak of, but it could probably be better. Thanks | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Drive shaft alignment - Mrkentee - 08-06-2021 RE: Drive shaft alignment - Rawze - 08-06-2021, RE: Drive shaft alignment - hookliftpete - 08-06-2021, RE: Drive shaft alignment - Chamberpains - 08-06-2021, RE: Drive shaft alignment - Mrkentee - 08-08-2021, RE: Drive shaft alignment - snailexpress - 08-08-2021, RE: Drive shaft alignment - stevegrutz - 08-08-2021, RE: Drive shaft alignment - Rawze - 08-08-2021, RE: Drive shaft alignment - Mrkentee - 08-15-2021, RE: Drive shaft alignment - snailexpress - 08-15-2021, RE: Drive shaft alignment - Mrkentee - 08-18-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.