| Turn key, no start |
| 03-05-2022, (Subject: Turn key, no start ) Post: #1 | |||
| |||
| Turn key, no start Every so often when I turned the key to start my truck, it wouldn’t do anything the first time, sometimes twice. Then one day it wouldn’t start after several tries. I banged on the starter, and it started right up. So I replaced the starter, and the “P” lead broke off when I took it apart. Aha! That was it. Well, it wasn’t. Still did it off and on. I replaced the switch. Soon enough, it was doing it again. I found that the solenoid was throwing out, but starter wouldn’t turn. I have searched in vain for the starter relay, and I don’t think this truck has one. I pulled them all and it still started. I think it’s controlled by the cecu cab controller. So I cleaned up the grounds, and we’ll see how it goes. Any ideas? It’s a 2010 Peterbilt 386. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Turn key, no start - Mrkentee - 03-05-2022 RE: Turn key, no start - tree98 - 03-05-2022, RE: Turn key, no start - Nilao - 03-05-2022, RE: Turn key, no start - Mrkentee - 03-05-2022, RE: Turn key, no start - Nilao - 03-05-2022, RE: Turn key, no start - Mrkentee - 03-06-2022, RE: Turn key, no start - Mrkentee - 03-06-2022, RE: Turn key, no start - tree98 - 03-06-2022, RE: Turn key, no start - Mrkentee - 03-06-2022, RE: Turn key, no start - Rawze - 03-06-2022, RE: Turn key, no start - Moose - 03-06-2022, RE: Turn key, no start - Mrkentee - 03-06-2022, RE: Turn key, no start - Nilao - 03-08-2022, RE: Turn key, no start - Mrkentee - 03-16-2022, RE: Turn key, no start - Mrkentee - 03-28-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.