Turbo or controller issue?

new reply

Threaded Mode | Linear Mode

Turbo or controller issue?

03-14-2022, (Subject: Turbo or controller issue? )

Post: #6

Mr Hagg Offline

HMR-Contrinbuting V.I.P. (859 Likes)

Posts: 440
Joined: Jul 2015

Thanks: 39
Given 859 thank(s) in 294 post(s)

RE: Turbo or controller issue?

Here lately we been finding that the data link going to turbo has been having issues since the same line is used for after-treatment system too. So may have to ohm data to turbo with it plugged in back prob connector it should be 60 ohms. unplugg it and ohm acuator it should be 120 and harness side should be 120

Return to Top | find

reply reply

Thanks given by:

Rawze , DSTdriver

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Turbo or controller issue? - Lonestar10 - 03-10-2022,

RE: Turbo or controller issue? - Nilao - 03-10-2022,

RE: Turbo or controller issue? - Rawze - 03-11-2022,

RE: Turbo or controller issue? - Lonestar10 - 03-11-2022,

RE: Turbo or controller issue? - Rawze - 03-11-2022,

RE: Turbo or controller issue? - Mr Hagg - 03-14-2022

RE: Turbo or controller issue? - Lonestar10 - 03-17-2022,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.