International 9200 suddenly won’t crank

[DVT873]

Somewhere between the solenoid on top of the starter and the switch in the cab there should be a solenoid/relay that looks like this, https://www.google.com/search?q=1693479c...e&ie=UTF-8
Usually on the engine side of the firewall towards the center. The switch in the cab triggers it sending power down to the start post on the starter solenoid. That firewall mounted solenoid is a common failure. Try jumping acroos the two big posts on that solenoid. If that starts it either the solenoid is bad or the wiring to or from it. Have seen the greenies get in the big wires. Usually from the solenoid down to the starter.