Truck stumbled under acceleration then died

[Redland1]

(01-07-2023 )Rawze Wrote:  The intake manifold pressure fault is not normal. Will make it loose fuel mileage and cause other turbo, etc. issues. replace old sensors, ensure wiring is good and do a clean out of piping, CAC leak check, etc. for it.


As far as it cutting out .. might also want to smack the top of the ecm and see if it is going bad...
ref: http://rawze.com/forums/showthread.php?t...2#pid74392

The pressure sensor code has been on for a year.Replaced the sensor and looked at the wiring and couldn’t find anything. Could all the low voltage or voltage shorted to low codes I keep getting be ECM related?
And if I do need a new ECM what are my options new or refurbished?