Cab mount bushings

[Waterloo]

(09-23-2016 )Rawze Wrote:  

(09-22-2016 )CFR__AND_SONS Wrote:  Anybody replace cab mounts themselves on Prostar? Should I replace both sides at the same time or can I just replace the bushings on the side theyre non-existent?

If you are referring to the front cab mounts, the bushings are very easy to change. You do need to take the weight off of them and do them one at a time though. I use a floor jack and a 4x4 to take the weight while they are out.

One of the mechanics was installing them when I was in the shop... He used a cherry picker, hooked it around that protrusion that comes out of the cab with a strap. Right above where the hood on the ProStar latches. He had both installed in like a half an hour.