Is there any other way to check injectors

[gatow900]

I have done the bubble test and ran the truck on one cylinder at a times and no luck. I jet a miss at idle here and there and under load I does the same. Any help I'm losing my mind over this.

[Rawze]

let it sit overnight, pull the valve cover and crank it up. Look at it with a thermal camera and see what injector(s) are colder than the rest as it starts to warm up?

just some thoughts on it.

[gatow900]

Don't have thermostat cam. Just thermogun may be that would work. Or just do old school and take exhaust manifold off and see witch on misses.

[gearhead]

thermo gun will work check and see what you get right after start up.

[Mr Hagg]

I think maybe more along the line of actuators, how old are they?

[Jonarcisse]

(03-11-2017 )Mr Hagg Wrote:  I think maybe more along the line of actuators, how old are they?

Good evening Mr. Hagg whats the name and number for your shop

[gatow900]

So I did check for temp with thermo gun no big difference. So I took all off them out and one had half of the hole on the tip clogged. I had a spare one replaced it and everything is go. Sorry for late up date and than thanks for your help