Condensate in oil fill cap |
02-17-2019, (Subject: Condensate in oil fill cap ) Post: #10 | |||
| |||
RE: Condensate in oil fill cap Leak was at lower radiator hose to cross pipe. When very cold rubber is hard and constant torque clamp doesn't squeeze enough. Once the coolant warms up, no leak. Hose was original and swollen. New hose and clamps. Also a long term very small weep at hard line to sleeper heater core. Seal is compressed o rings. Rings were hard. Size was not available at the local hardware store so turned down a larger size to fit. Pressurized the system for 3 days in the snow with no loss and pronounced done. User's Signature: 2011 Prostar Cummins 871 | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.