| Metering actuator question |
| 04-23-2020, (Subject: Metering actuator question ) Post: #1 | |||
| |||
| Metering actuator question Anyone ever seen this? The one metering actuator has o-rings instead of a gasket and it. Cummins looked up part numbers and old ones from a cm570, 870 and 871 and cant find one that didnt have a gasket.   User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit. | |||
| 04-23-2020, (Subject: Metering actuator question ) Post: #2 | |||
| |||
| RE: Metering actuator question My CM870 had one apparently the metal gasket is supposed to work with the old style actuator too don't take my word on it though. | |||
| 04-23-2020, (Subject: Metering actuator question ) Post: #3 | |||
| |||
| RE: Metering actuator question very early ones had o-rings like that - then they went to newer style updated with the metal gasket. | |||
|
| 04-23-2020, (Subject: Metering actuator question ) Post: #4 | |||
| |||
| RE: Metering actuator question The 870 style ifsm I put on my 871 had clean marks that clearly showed it had oring actuators on it. Saw several ifsm units in the salvage yard Cummins box where I found mine but all the others had a different filter base on them that took alot bigger filters and had different sized threaded filter nipple. User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.