CM871 Turbo on CM2250
09-05-2020, (Subject: CM871 Turbo on CM2250 ) 
Post: #1
CM871 Turbo on CM2250
I remember seeing a thread on this subject but I cannot find it now.

I am looking to install the CM871 turbo on my CM2250. My turbo started pushing a little bit of oil and I am not a gambling man.

Who can retune the truck for that turbo? I believe I tried sending a message to a member before and never received a response.

Truck is demandated. Maybe that someone can take a look at the tune itself. There is a hill in TN that my truck likes to boost to 39-40 psi.
replyreply
09-05-2020, (Subject: CM871 Turbo on CM2250 ) 
Post: #2
RE: CM871 Turbo on CM2250
(09-05-2020 )Aleeex Wrote:  I remember seeing a thread on this subject but I cannot find it now.

I am looking to install the CM871 turbo on my CM2250. My turbo started pushing a little bit of oil and I am not a gambling man.

Who can retune the truck for that turbo? I believe I tried sending a message to a member before and never received a response.

Truck is demandated. Maybe that someone can take a look at the tune itself. There is a hill in TN that my truck likes to boost to 39-40 psi.

39psi boost on a 2250 will kill it.

36 is max it can handle.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: JMBT
09-05-2020, (Subject: CM871 Turbo on CM2250 ) 
Post: #3
RE: CM871 Turbo on CM2250
(09-05-2020 )Rawze Wrote:  
(09-05-2020 )Aleeex Wrote:  I remember seeing a thread on this subject but I cannot find it now.

I am looking to install the CM871 turbo on my CM2250. My turbo started pushing a little bit of oil and I am not a gambling man.

Who can retune the truck for that turbo? I believe I tried sending a message to a member before and never received a response.

Truck is demandated. Maybe that someone can take a look at the tune itself. There is a hill in TN that my truck likes to boost to 39-40 psi.

39psi boost on a 2250 will kill it.

36 is max it can handle.

currently sitting in the truck trying to figure out how to pull the file
replyreply
09-05-2020, (Subject: CM871 Turbo on CM2250 ) 
Post: #4
RE: CM871 Turbo on CM2250
Also, I am going off the OEM gauge in the truck. I should probably verify this with an analog gauge
replyreply
09-05-2020, (Subject: CM871 Turbo on CM2250 ) 
Post: #5
RE: CM871 Turbo on CM2250
is it deleted and if so by who? if the tuning isnt from someone here it probably is hitting 39psi and killing itself


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
09-05-2020, (Subject: CM871 Turbo on CM2250 ) 
Post: #6
RE: CM871 Turbo on CM2250
(09-05-2020 )Lonestar10 Wrote:  is it deleted and if so by who? if the tuning isnt from someone here it probably is hitting 39psi and killing itself

Rawze knows him, but supposedly he is getting sloppy.

Maybe if I buy Rawze enough beer he will teach me a couple things so I can test them out on my truck.,



Tuning related that is
replyreply
09-05-2020, (Subject: CM871 Turbo on CM2250 ) 
Post: #7
RE: CM871 Turbo on CM2250
Aleeex, why would you do this? The 871 turbo, as Rawze already told you is unusable on a 2250. Why put on a bigger turbo if the motor can’t handle the extra boost it will generate. As I understand it the stock has no problem with supplying enough boost in any condition.

Talk to Magard, he did this very thing. And I think he said it was a waste of time. (Magard please correct me if I am wrong)

Just my .02. I pull up to 105K gross just fine with my 2250, stock turbo, and properly demandated.


User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!
replyreply
 Thanks given by: PuroCumminsPower
09-05-2020, (Subject: CM871 Turbo on CM2250 ) 
Post: #8
RE: CM871 Turbo on CM2250
(09-05-2020 )JMBT Wrote:  Aleeex, why would you do this? The 871 turbo, as Rawze already told you is unusable on a 2250. Why put on a bigger turbo if the motor can’t handle the extra boost it will generate. As I understand it the stock has no problem with supplying enough boost in any condition.

Talk to Magard, he did this very thing. And I think he said it was a waste of time. (Magard please correct me if I am wrong)

Just my .02. I pull up to 105K gross just fine with my 2250, stock turbo, and properly demandated.

Rawze did not say that.


And I am not after more boost.



I want to test a theory that I have, and this has been done. No one really talks about it.


I just checked my messages and I sent a message to Unilevers over a year ago. Maybe he will see this thread?
replyreply
09-05-2020, (Subject: CM871 Turbo on CM2250 ) 
Post: #9
RE: CM871 Turbo on CM2250
http://www.myholsetturbo.com/holsethe400.html

an He561 flows a lot more air than a he400

Its possible that I wont even need to run as much boost to make the same power. Less boost = less intake temps
replyreply
 Thanks given by: 03maxpower




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.