| SAS fault |
| 10-18-2020, (Subject: SAS fault ) Post: #1 | |||
| |||
| SAS fault I have a 2012 Pete 587 and I purchased an aftermarket steering wheel and hub kit as my factory steering wheel covering was completely falling apart. I replaced the steering wheel and now have a SAS (steering angle sensor) fault. Is there a process to reset this or will I have to find someone with a computer and software? | |||
| 10-19-2020, (Subject: SAS fault ) Post: #2 | |||
| |||
RE: SAS fault (10-18-2020 )kellyedrew Wrote: I have a 2012 Pete 587 and I purchased an aftermarket steering wheel and hub kit as my factory steering wheel covering was completely falling apart. I replaced the steering wheel and now have a SAS (steering angle sensor) fault. Is there a process to reset this or will I have to find someone with a computer and software?Need computer and software to recalibrate sensor. If truck with Bendix ABS/TCS you can use ACom diagnostic from Bendix and Inline adapter. | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.