| Used ECM |
| 06-23-2023, (Subject: Used ECM ) Post: #1 | |||
| |||
| Used ECM [attachment=8990] I’ve been considering ordering a used CM870 ECM to have as a spare and having my local dealership flash the latest program on it. How do I know which ECM is compatible with my engine other than just matching the part number from my current ECM? | |||
| 06-23-2023, (Subject: Used ECM ) Post: #2 | |||
| |||
| RE: Used ECM match the part# up. I hope that you are also are aware that the software for the CM870's has not been updated by cummins since about 2012 or so (10+ years ago) .. so having it 'updated' is pretty much fruitless at this point if your existing ecm was updated, replaced, re-flashed, etc. at some point in its distant past. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| 06-23-2023, (Subject: Used ECM ) Post: #3 | |||
| |||
| RE: Used ECM Thank you, that’s simple enough. | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.