| 3/4 torque wrench |
| 10-11-2016, (Subject: 3/4 torque wrench ) Post: #1 | |||
| |||
| 3/4 torque wrench Im looking to get 100-600lbs torque wrench that would be good when replacing wheel seals, torque lug nuts. There are bunch of cheap chineese in the market. Also cdi torque wrench is popular https://amzn.to/2LlPUKZ What are your opinions? User's Signature: Cascadia ISX15 CM2350 | |||
| 10-11-2016, (Subject: 3/4 torque wrench ) Post: #2 | |||
| |||
| RE: 3/4 torque wrench I have an inexpensive Jet Tools one for the road, and that looks just fine to me. Not nearly enough tire shops properly torque lug nuts, so you're a mile ahead just for doing it! It will make doing your own wheel seals easy and reassuring knowing you've set them properly. User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..." | |||
| 10-11-2016, (Subject: 3/4 torque wrench ) Post: #3 | |||
| |||
| RE: 3/4 torque wrench User's Signature: It's hard to win an argument with a smart person, but it's damn near impossible to win an argument with a stupid person | |||
| 10-12-2016, (Subject: 3/4 torque wrench ) Post: #4 | |||
| |||
| RE: 3/4 torque wrench I have a local OTC tool dealer up the road from me. This is the one i have.. https://www.otctools.com/products/accuto...que-wrench or someone could go digital... https://amzn.to/2VC0Wzy User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.