Copying the program out of your ecm ...

[wadeclaiborne]

Great info! Where can one obtain the calterm software? I've searched around a but. Feel free to pm me if you'd rather not just throw it out there.

[HAULNTX]

Does anyone have recommendations for a type of laptop to purchase?

Also which cummins insite would work for a 870, 871, and a 2014 isx12?

I just purchased a dell laptop and inline 6. Hopefully that will be a good set up for the 871. Its the most critical of the 3 trucks I have.

[Kw9006nz]

Good afternoon 2018 x15 cm2350, I have the ecm side covered thanks to this forum. I have the cans off and ready to hollow out. To clarify just for the sake of it. I completely gut the cans from front to back on the inside correct? Is there anything I need to watch for that needs to be left in place? ie the outlet where the nox sensor port, the excess particulate sensor port, and inner shroud for the outlet temp sensor? Also taking exhaust bellows from manifold to egr cooler in to have a 1/4 stainless plug welded in. As for the butterfly valve just getting the flap off enough or more?

[Kw9006nz]

I got a high particulate matter code and suggested to the service Manager I bought the truck from that after looking on this forum and quick serve that it could be a crystallized decomp tube and he said and I quote "no, I don't believe that idk where you heard or read that but we baked and de-ashed the cans and it passed a regen so whoever told you doesn't know what they're talking about" hahaha I literally said oh I think they do. Took them apart today and ope what do you know. Also are you guys seeing anything glaringly wrong with the engine based on these pictures?

[Rawze]

Those cans are not good. - Trash.

you can also see signs of where a lot of liquid has gone thru them as well.