Doing cams and front structure |
10-16-2016, (Subject: Doing cams and front structure ) Post: #37 | |||
| |||
RE: Doing cams and front structure (10-16-2016 )Rawze Wrote:(10-15-2016 )Brock Wrote: Well I'll be damned.... I've never seen this before! I didn't think it was possible with the weight I haul and the idle time I have but here it is, a few thousand km and still looks pretty good! I'm guessing it's more or less residuals left that have it that dark, I think my next oil change will clear it out. Give it boost at idle you say? lol damn. That's what I did when my turbo was pushing oil but once I fixed the turbo, I turned my idle boost back down. User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit. | |||
10-17-2016, (Subject: Doing cams and front structure ) Post: #38 | |||
| |||
RE: Doing cams and front structure Well my trucks being a asshole today. Since shimming my oil pump, I've been running down the road around 50psI at 200 degrees and a couple psi lower when warmer.... .But mid day today it randomly went and dropped 10psi! I'm running down the road at 38psi at 200 degrees now. Bullshit! User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit. | |||
10-17-2016, (Subject: Doing cams and front structure ) Post: #39 | |||
| |||
RE: Doing cams and front structure (10-17-2016 )Brock Wrote: Well my trucks being a asshole today. Since shimming my oil pump, I've been running down the road around 50psI at 200 degrees and a couple psi lower when warmer.... something is amiss i would pull the oil filter and cut it open and Dubble check oil press with a gauge for starters then look for blown seals orings turbo seals | |||
10-17-2016, (Subject: Doing cams and front structure ) Post: #40 | |||
| |||
RE: Doing cams and front structure (10-15-2016 )Brock Wrote: Well I'll be damned.... I've never seen this before! I didn't think it was possible with the weight I haul and the idle time I have but here it is, a few thousand km and still looks pretty good! This is mine after an oil change. I have an 870 and the Speedco guys were amazed. Usually on these engines the oil is black right after startup. Mine is still pretty clean after a couple of thousand miles. | |||
10-17-2016, (Subject: Doing cams and front structure ) Post: #41 | |||
| |||
RE: Doing cams and front structure (10-17-2016 )Brock Wrote: Well my trucks being a asshole today. Since shimming my oil pump, I've been running down the road around 50psI Sat 200 degrees and a couple psi lower when warmer....Sounds like the sending unit is on the way out. Ours would go to 0,20 and back to normal,freaked me out. Been fine ever since I changed it. Still want to add a mechaical gauge. User's Signature: 2010 386 Pete CM871, 13 spd. 3.55 | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.