Regen light on

[schISM]

(01-05-2018 )hhow55 Wrote:  

(01-05-2018 )schISM Wrote:  Yup, in features and parameters expand the aftertreatment then dpf then make sure your switch for inhibit and start regen is enabled. I had to do this with this last truck I bought and it had the correct programming and came configured from kenworth this way. You can also enable exhaust high temp. light and choose at what temp. and speed its allowed to come on.

Thank you very much Mr. Schism,
I appreciate you mentioning the exhaust high temp light since mine never comes on.
What temp, and speed you recommend it to come on?

Your welcome, and I set mine on at 800, off at 700 and on under 10mph