Cm2250 tune
06-22-2018, (Subject: Cm2250 tune ) 
Post: #5
RE: Cm2250 tune
(06-21-2018 )cyclegear99 Wrote:  I got a remote mandate by a guy in Oregon, was wondering if someone could check the tune and make sure its correct, I don't want to fall victim to a blown motor. Manifold pressure is at 35 psi
Motor runs smoothly, and Jake's work good. Just want to make sure every parameter has been changed to correct number or code

By a guy Oregon, you have been screwed.


User's Signature: It's hard to win an argument with a smart person, but it's damn near impossible to win an argument with a stupid person
replyreply


Messages In This Thread
Cm2250 tune - cyclegear99 - 06-21-2018,
RE: Cm2250 tune - Nilao - 06-21-2018,
RE: Cm2250 tune - cyclegear99 - 06-21-2018,
RE: Cm2250 tune - cyclegear99 - 06-21-2018,
RE: Cm2250 tune - hhow55 - 06-22-2018
RE: Cm2250 tune - Rawze - 06-22-2018,
RE: Cm2250 tune - cyclegear99 - 06-22-2018,
RE: Cm2250 tune - Unilevers - 06-22-2018,
RE: Cm2250 tune - Nilao - 06-22-2018,
RE: Cm2250 tune - cyclegear99 - 06-22-2018,
RE: Cm2250 tune - smorgan87 - 06-23-2018,
RE: Cm2250 tune - cyclegear99 - 06-23-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.