Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / CAT, Detroit, and Other engine related Help... / My Cat rod bearings...

new reply
My Cat rod bearings...
08-20-2018, (Subject: My Cat rod bearings... ) 
Post: #21
Rawze Offline
Forum Reject  (13933 Likes)  *******

 		Posts: 11,042
Joined: Jun 2013
Thanks: 5900
Given 13933 thank(s) in 6089 post(s)
RE: My Cat rod bearings...
(08-19-2018 )Zhidden Wrote:  ...
I am seeing a lot of contamination in the bearings and #1 definitely had something behind the bearing when it got installed
...

Sometimes that is the case when you see scarring on the bearing and everyone is quick to always blame it on "must have been dirty when installed".

What I have found though is that many times the scarring is actually carbon packing that has gotten into them.

./uploads/201808/post_2_1534770013_6cef07d90dc24a96942d3cef0e8db62a.png

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
My Cat rod bearings... - Brock - 06-24-2018,
RE: My Cat rod bearings... - Rawze - 08-20-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication