eaton 13spd
08-29-2018, (Subject: eaton 13spd ) 
Post: #14
RE: eaton 13spd
Just got done pulling a 9/13 tranny and replacing a clutch with my buddy.. in the driveway on a piece of plywood. Its not a difficult job just time consuming especially on truck that requires both emissions cans be removed just to find the tranny and a crossmember under it that can be removed because batteries and control modules are in the way. A good solid tranny jack is mandatory and smooth concrete is recommended.
replyreply


Messages In This Thread
eaton 13spd - Evotrucker - 08-28-2018,
RE: eaton 13spd - Nostalgic - 08-28-2018,
RE: eaton 13spd - Evotrucker - 08-28-2018,
RE: eaton 13spd - Rawze - 08-28-2018,
RE: eaton 13spd - Evotrucker - 08-28-2018,
RE: eaton 13spd - Rawze - 08-28-2018,
RE: eaton 13spd - Nilao - 08-28-2018,
RE: eaton 13spd - Unilevers - 08-28-2018,
RE: eaton 13spd - Nostalgic - 08-28-2018,
RE: eaton 13spd - Chamberpains - 08-28-2018,
RE: eaton 13spd - Evotrucker - 08-28-2018,
RE: eaton 13spd - Moose - 08-28-2018,
RE: eaton 13spd - dhirocz - 08-28-2018,
RE: eaton 13spd - Moose - 08-29-2018,
RE: eaton 13spd - smorgan87 - 08-29-2018
RE: eaton 13spd - Evotrucker - 08-29-2018,
RE: eaton 13spd - Moose - 08-29-2018,
RE: eaton 13spd - dhirocz - 08-29-2018,
RE: eaton 13spd - Nostalgic - 08-30-2018,
RE: eaton 13spd - Chamberpains - 08-30-2018,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.