CM 871 Code 2639, DPF won't clean
03-08-2019, (Subject: CM 871 Code 2639, DPF won't clean ) 
Post: #11
RE: CM 871 Code 2639, DPF won't clean
(03-08-2019 )Doops22 Wrote:  The filters were cleaned and baked. Is that high enough to trip the light? Maybe the DPF delta P sensor is bad?

don't forget that the crossover tubes for the DPF Delta-p can get partially clogged and make it read high too. Also it can read wrong if the rubber bushings at its feed-point get cracked/leaky.

Lastly, if you had the DPF and DOC baked out, you need to perform a "DPF Maint. Reset" or whatever its called in Insite.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Doops22


Messages In This Thread
RE: CM 871 Code 2639, DPF won't clean - Unilevers - 03-08-2019,
RE: CM 871 Code 2639, DPF won't clean - Rawze - 03-08-2019
RE: CM 871 Code 2639, DPF won't clean - Unilevers - 03-08-2019,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.