GlowShift boost gauge response

[Rawze]

(03-17-2019 )SquareOne Wrote:  Never tried applying pressure to the boost gauge without power, or heat to the pyro without power either. The pyro will actually do a sweep before it reads out, then return to '0' once the key is off (which is why I thought stepper). The boost does not sweep, so it may very well just be mechanical with power for the lighting.

yes, pyro is electrical. It sweeps to zero itself out. Boost is mechanical on glowshift w small hose, but is electric on the Maxtow boost gauge that has the electronic pressure sensor.