Automated Eaton 10 speed shifting weird

[arch_stanton]

I just had a clutch replaced on an automated tranny under warranty apparently Eaton had a problem in manufacturing for 1 1/2 years the trans had no codes for 2 years but had an occasional shifting problems then one day threw fault codes and would not go faster than about 20 MPH. my truck was manufactured 10/18 so there was a record that it was within the serial number range for the problem but if you had a clutch installed there is no recall notice that I know of but ask questions and maybe somebody will man up. The problem as I understand it is the fingers on clutch bend and break.