Last straw

[Rawze]

(09-28-2019 )DVT873 Wrote:  

(09-28-2019 )Lonestar10 Wrote:  And turbo actuator has a bad logic board and turbo itself sounds little rough sounds like a trip to yiyoto

Rawze, would you put up some info about your canbus tester?

It is an Elegoo TFT screen made for an Arduino Uno, but I made a custom adapter board for a teensy 3.6 (Arduino) in Kicad and had a circuit board company make blank board. So .... it is connected to a Teensy 3.6 Arduino + can bus adapter circuit. The teensy was used to achieve the processing power needed to keep up with the J1939 high speed signals. I started out making it with an UNO board but it was waay too slow.

-- All the drivers for the can bus + the J1939 drivers + the connection drivers for the elegoo screen + the graphics and text library are literally all 100% written by me from scratch along with the entire program for testing turbos. <- there are drivers and libraries out there for screen, can bus on the internet but they all suck real bad, are written very poorly, and are way too slow. The can bus driver libraries for the teensy 3.6 are just plain horrible. so are all the graphics libraries that came with the display.