Last straw

[Rawze]

(10-15-2019 )Unilevers Wrote:  i measured 500lbft on final torque myself, but the measurement wasnt 100% perfect so its good to see that you came out there aswell.

I know of one shop about 3 or so years ago that was blowing head gaskets like mad.

Turns out the head mechanic (supposedly factory trained by cummins, certified, etc.) argued with me and hung up on me after telling me that you only need to torque head to 300 ft-lbs. They were not doing the final 90 degrees torque.

-- I got an apology from another shop member of that place about 4 months later after the 8th or 9th engine blew a head gasket a 3rd time by this arrogant self righteous arsse-clown!