Last straw

[Lonestar10]

So far i can tell the engine is smoother with the new head but power is still not there only 30-32 psi at full chooch and about 95-96k rippems according to insite. on 1 pull i put turbo in manual went to 60% then i hit near 38. im going to pull DPF can apart this weekend and make sure its clean and isnt and never will be a problem.

i also with head rebuilt the IFSM which i replaced with a CM870 IFSM since mine the pressure sensor port stripped. and insite showed 276-285psi depending on load for fuel pressure.

but the Actuators are remands i put on end of last year gona probably take them off this weekend also and pull them apart to make sure nothings in them incase they are the issue.