actuator orings or gasket
01-01-2020, (Subject: actuator orings or gasket ) 
Post: #1
actuator orings or gasket
I have a 2005 cm870 timing actuator with orings instead of a gasket and cummins in Augusta cant tell me the part number or if the gaskets work on these. Any one know what the part number for the orings would be?
replyreply
01-01-2020, (Subject: actuator orings or gasket ) 
Post: #2
RE: actuator orings or gasket
The injector testing tool 3164001 comes with orings part number 3867640, perhaps that’s the same oring for the actuator?

Otherwise go to Quickserve with your engine serial number and look up the actuator and oring part number. I can look it up on my engine in a bit and see what Quickserve calls for, I have a CM870 too


User's Signature: I have no idea what I’m doing and probably need supervising
replyreply
 Thanks given by: tdawg
01-01-2020, (Subject: actuator orings or gasket ) 
Post: #3
RE: actuator orings or gasket
Quickserve doesn't show it on any of my engines
replyreply
01-01-2020, (Subject: actuator orings or gasket ) 
Post: #4
RE: actuator orings or gasket
1 x 3045986 & 3 x 3044297 per actuator.
replyreply
 Thanks given by: tdawg , wrightone
01-01-2020, (Subject: actuator orings or gasket ) 
Post: #5
RE: actuator orings or gasket
(01-01-2020 )tdawg Wrote:  Quickserve doesn't show it on any of my engines

./uploads/202001/post_2980_1577901064_03d707c2b18f7e4af85f24776a9d258f.png
Quickserve just shows a gasket on mine. For some reason part numbers aren’t showing up today


User's Signature: I have no idea what I’m doing and probably need supervising
replyreply
01-01-2020, (Subject: actuator orings or gasket ) 
Post: #6
RE: actuator orings or gasket
Yes the flat gaskets will work, they're the same actuators as the 871 that use them.
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.