Broken exhaust manifold bolt CM870
01-15-2020, (Subject: Broken exhaust manifold bolt CM870 ) 
Post: #5
RE: Broken exhaust manifold bolt CM870
(01-15-2020 )Chamberpains Wrote:  ...
Also when I get a new manifold, I'd like to know if there is a manifold part number that doesn't have the EGR port being I don't have EGR on this truck anymore. I want to eliminate having to use the blocking plate. But I still need the tube for the exhaust pressure sensor in the correct place.

order the section for #5,6 and cut out the bung on the front side section for the exhaust pressure sensor pipe, drill hole, then weld it onto the new piece.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Chamberpains


Messages In This Thread
RE: Broken exhaust manifold bolt CM870 - Rawze - 01-15-2020
RE: Broken exhaust manifold bolt CM870 - Unilevers - 01-15-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.