CM871 kickin my Butt |
08-17-2020, (Subject: CM871 kickin my Butt ) Post: #93 | |||
| |||
RE: CM871 kickin my Butt (08-17-2020 )RustyWood Wrote:(08-17-2020 )tree98 Wrote: What part of the world are you in? Maybe someone on here can lend a hand. so just hire a local guy to do the counter-bores and tell them you want a sopecific depth cut... An OEM shim of 0.020" and a depth of 4.741" results in 0.014" height. <- OPTIMAL HEIGHT!. An OEM shim of 0.020" and a depth of 4.740" results in 0.015" height. (exceptable but is the upper limit). ref: http://rawze.com/forums/showthread.php?t...5#pid39685 and http://rawze.com/forums/showthread.php?t...9#pid28349 -- most ppl doing counter-bores for red engines charge about $100 per hole. Just have em show you the depths in detail to ensure they did it they way you want to and ignore their complaining about trying to make it 0.010" height instead demand they set it so that you get 0.014". User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.