Advice for new isx cm871 owner
08-31-2020, (Subject: Advice for new isx cm871 owner ) 
Post: #1
Advice for new isx cm871 owner
I just bought my first isx truck. It’s an 2010 kenworth cm871 pre def motor. I have been researching and learning as much as I can about these engines on this forum and through rawze’s videos. Does any have any suggestions as far as what should be done to an engine like this with no service history. I was wanting to start with the egr cleaning videos. Just looking for other suggestions as well or upgrades/ updates people recommend. Thanks in advance and this forum is amazing. No bull just good people helping, it’s definitely a great resource!
replyreply
08-31-2020, (Subject: Advice for new isx cm871 owner ) 
Post: #2
RE: Advice for new isx cm871 owner
How many miles? Gearing? Transmission and rear ends? EGR Tuneup BIG YES. Do that first... Any issues or codes, and is it deleted?


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply
08-31-2020, (Subject: Advice for new isx cm871 owner ) 
Post: #3
RE: Advice for new isx cm871 owner
maybe start by reading, researching, etc... here is a decent place to start...
http://rawze.com/forums/showthread.php?t...1#pid31741


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
08-31-2020, (Subject: Advice for new isx cm871 owner ) 
Post: #4
RE: Advice for new isx cm871 owner
(08-31-2020 )Waterloo Wrote:  How many miles? Gearing? Transmission and rear ends? EGR Tuneup BIG YES. Do that first... Any issues or codes, and is it deleted?

It’s a dump truck so a little different specs than most of you guys run but it’s 364k miles, 8ll trans with 4.10 gears. One code of outside air temp sensor but so far nothing else. It’s not deleted or mandate’d yet.
replyreply
08-31-2020, (Subject: Advice for new isx cm871 owner ) 
Post: #5
RE: Advice for new isx cm871 owner
You will need one of these... https://www.ebay.com/itm/Cummins-INLINE-...SwIJlZ9U~7


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply
08-31-2020, (Subject: Advice for new isx cm871 owner ) 
Post: #6
RE: Advice for new isx cm871 owner
(08-31-2020 )Rawze Wrote:  maybe start by reading, researching, etc... here is a decent place to start...
http://rawze.com/forums/showthread.php?t...1#pid31741

Thanks!! I really appreciate all the time and effort you put into this. It’s amazing the amount of info here.
replyreply





  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication