RIP CM2250, 2013, 800,000km 20,000 hrs
07-07-2022, (Subject: RIP CM2250, 2013, 800,000km 20,000 hrs ) 
Post: #76
RE: RIP CM2250, 2013, 800,000km 20,000 hrs
So this trucks been sitting for a few weeks now as I start to get ready when I have time. Is there a way for me to check injector performance when the pressure being measured is 10,000 psi less than commanded? Head is not leaking externally at this point. I don't think i can do the return flow test for the injectors if I'm not making enough pressure? Or can I?

Thinking either pull the injectors out and get them tested - thoughts on that. Or find injectors that are known to be good and swap to test.
replyreply


Messages In This Thread
RE: RIP CM2250, 2013, 800,000km 20,000 hrs - Hermjeji - 07-07-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.