Transmission jacks....any suggestions?
02-19-2021, (Subject: Transmission jacks....any suggestions? ) 
Post: #10
RE: Transmission jacks....any suggestions?
I get by ok with the heavier harbor freight trans jack but as stated b4 the casters suck and the plate adjustments arent the greatest either. If i used one more than once ever cpl years id certainly spring for a cpl hunnit more bucks on a good one.
replyreply
 Thanks given by: Rawze , JMBT
02-19-2021, (Subject: Transmission jacks....any suggestions? ) 
Post: #11
RE: Transmission jacks....any suggestions?
I used the Harbor Freight lift table to drop mine and it was a breeze. I didn’t install the table handle and it slides under there and the wheels don’t lock up as easy as the jack.

https://www.harborfreight.com/1000-lbs-c...60438.html
replyreply
 Thanks given by: JimT , JMBT
02-21-2021, (Subject: Transmission jacks....any suggestions? ) 
Post: #12
RE: Transmission jacks....any suggestions?
That’s an interesting idea Kingman11 that I had not considered.

Ahub86: thanks for the pics!!

I bought the harbor freight 2000lb jack it was on sale for $249, normally $329, so I couldn’t pass it up. I think the OTC road ranger plate could be bolted on nicely based on the pics from Ahub86, so I may order on of those in as well.

Thanks again for all the feedback!


User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!!
replyreply





  
  
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication