Super Duper Crankshaft
03-15-2021, (Subject: Super Duper Crankshaft ) 
Post: #1
Super Duper Crankshaft
./uploads/202103/post_856_1615844755_e30f3cdf064243532065e7578fa33b96.png


User's Signature: It's hard to win an argument with a smart person, but it's damn near impossible to win an argument with a stupid person
replyreply
 Thanks given by: Waterloo , Roysbigtoys , snailexpress , Pd6cas2
03-15-2021, (Subject: Super Duper Crankshaft ) 
Post: #2
RE: Super Duper Crankshaft
Going in your new boat? ;-)


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply
03-15-2021, (Subject: Super Duper Crankshaft ) 
Post: #3
RE: Super Duper Crankshaft
I wonder if they use a electric starter motor
replyreply
03-15-2021, (Subject: Super Duper Crankshaft ) 
Post: #4
RE: Super Duper Crankshaft
(03-15-2021 )arch_stanton Wrote:  I wonder if they use a electric starter motor

They probably use compressed air to start it like they do on ocean liners and cargo ships but I'm just guessing. That thing is much larger than your average ocean liner engine
replyreply
03-16-2021, (Subject: Super Duper Crankshaft ) 
Post: #5
RE: Super Duper Crankshaft
Kick start?



replyreply
 Thanks given by: hhow55 , Roysbigtoys
03-16-2021, (Subject: Super Duper Crankshaft ) 
Post: #6
RE: Super Duper Crankshaft
Yach, theyre built for these new mega freighter ships.
replyreply
03-16-2021, (Subject: Super Duper Crankshaft ) 
Post: #7
RE: Super Duper Crankshaft
I guess once the engine wears out or throws a rod they just scrap the whole ship. Doesn't look feasible to replace an engine.

I wonder what the dpf looks like? The urea tank must hold 20,000 gallons lol


User's Signature: im_seeing_parameters_in_my_sleep 1
replyreply
 Thanks given by: JimT
03-16-2021, (Subject: Super Duper Crankshaft ) 
Post: #8
RE: Super Duper Crankshaft
If I remember correctly it idles at 16 rpm or some ungodly low rpm....definitely no high rip'em numbers
replyreply
03-17-2021, (Subject: Super Duper Crankshaft ) 
Post: #9
RE: Super Duper Crankshaft
I'd like to see a demonstration on the injectors and the fuel injection process on this behemoth. How exactly do you get X amount of fuel to atomize and spread enough to have proper combustion in such a vast space? Just 1 huge injector? Or did they have to take a new angle?

I'll bet they learn a pile of insight in to the minutia of smaller engines by building these enormous ones. You can physically see every nook and cranny instead of relying solely on sensor feed back, theory and failure analysis. In my mind things that occur at 1x (size) should be amplified at 100x (size)

Very fascinating post.
replyreply
 Thanks given by: JimT




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.